Get this Wilson Cellular Signalboost Dual-Band (801233) at low prices! Boost and increase your cell phone reception with this Wilson Cellular Signalboost Dual-Band (801233)! Wilson has been known for their durable and top quality products which has been brought by many and have enjoyed more chats with friends and family because Wilsons superb products have helped boost their cell phone signal strength. So where ever you are, as long you have one bar, this Wilson Cellular Signalboost Dual-Band (801233) will help you get stronger cell phone signals.* What are the benefits of Wilson Cellular Wireless Mobile Amplifiers? The Wilson Cellular Wireless Amplifiers allow one or more users to benefit from an outside antenna and amplifier without a physical connection to the cell phone. This eliminates the need for an external antenna connection on the cell phone. Note: In order to maintain improved signal, your phone must be left in cradle during usage (i.e. you must use a headset or hands free car kit.) Wireless Cell Phone Amplifier vs Direct Connection Amplifier? The Wilson Cellular Wireless Amplifiers and Direct Connection Cell Phone Amplifiers perform comparably in urban situations. Both amplifiers transmit up to 3 Watts of power to the cell site and receive a signal as weak as -110dBm. For rural applications, the direct connect (inline) cell phone amplifier will perform better and is recommended. Installation Options: Option A (in car, Boat & RV): Option B (Personal work space at home or office): For personal workspace usage, make sure the inside antenna is roughly around 1-2 feet away from the your phone for the best coverage. A longer cable (951106) might be needed to connect the outside antenna to the amplifier due to the length of the inside antenna cable. Package Includes Signalboost Mini-Amp Includes Cradle with Built in Antenna Mounting brackets Cigarette lighter power supply adapter Installation guide Wilson Cellular Signalboost Dual-Band (801233) features Allows multiple phones and data cards to be used simultaneously Supports CDMA, TDMA, GSM and AMPS, in addition to 1x and 3x data protocols such as HSDPA, EVDO and EDGE Up to 3 watts maximum output power Power control logic ensures maximum output power is within cellular standards Requires no physical connection to cell phone or data card Provides high signal-to-noise ratio Protects cell sites from harmful interference Dual band - Cellular and PCS (check compatibilities at the bottom) FCC and IC type accepted Wilson Cellular Signalboost Dual-Band (801233) Specifications Part Number: 801233 Frequency: 824-894 MHz / 1850-1990 MHz Gain: 40 dB / 45 dB Max Output Power: 3watts Max RF: +35 dBm / +10 dBm Noise Figure: 3 dB nominal Flatness: ± 3 dB / ± 4 dB Isolation: > 90 dB Power Requirements: 6V, 3 A max Connectors: FME-Male 50 ohms Dimensions: 4.5 x 3.5 x 1.25 (inches) / 11.43 x 8.9 x 3.2 (cm) Weight: 1.5 lbs / More details about product Wilson Cellular Signalboost Dual-Band (801233)
|
