After noticing that most lunchbox-style rackmount power supplies always seemed to have only two slots in use, A Designs Audio created the R52 power supply. Now, rather than spend big bucks on an API lunchbox, the R52 gives you an affordable way to bring the magic of A Designs into your studio. Plus, you can easily add more as your studio grows. You are able to use the R52 and A Designs module combinations in four basic ways:1. Loaded with two preamps it becomes a dual channel Mic Pre 2. Loaded with two EQ's it is a dual channel EQ 3. Loaded with one preamp and one EQ and LINK engaged, it is a complete pre/post EQ recording channel 4. Use one preamp and the EQ in the R52 and bypass your pre on your guitar/bass/keyboard amplifier and have a totally different amp for any live situation.The R52 works normally in dual mono, via an XLR in and out for each channel. This enables use as a conventional two channel system for 500 mic pres or EQs. A special feature on the R52 is the LINK switch, which sends the output of Channel 1 (slot 1) to the input of Channel 2 (slot 2). This enables a console-like configuration with an input preamp on channel 1 feeding an EQ on channel 2 to a single balanced XLR output; the channels cascade, channel 1 feeding channel 2 like a console strip. However, the XLR output on Channel 1 (slot 1) is not disconnected during LINK so in a preamp slot 1, EQ slot 2 configuration, you have in 1U a "dry" direct out, a pre-EQ balanced output, and a "wet" post EQ balanced output. This unique option makes it especially flexible to those who own two preamps and two EQs with one rack, so 3 different combinations of systems can be configured in the field by the user. More details about product A-Designs R52 Dual Slot Rackmount Power Supply
|
